Cutting information
Below you will find information on cutting with a band saw and a cut-off saw
Sawing
We fulfil your cutting needs (made to your specification, serial and bundle cuts) via our sawing machines of high performance within a short delivery time, providing accurate execution and competitive prices.
Steel grades:
- stainless steel,
- heat-resistant steel,
- steel,
- aluminium.
Maximum diameter: 520 mm
Maximum cross section: 600*520 mm
Maximum bundle size:600*300 mm
When cutting with a band saw, the cut surface is more beautiful, but at the same time takes more time. During cutting, an emulsion flows onto the product, which can leave stains on aluminum.
The product is fixed and moved by a promotional vise, so sawing is not recommended for thin-walled pipes, for example, because the pipe may dent.
The minimum cut length is typically 12 mm, but the minimum amount that can be dispensed may differ.
The surface of the cut product can always be scratched!
Size tolerance typically: +/- 5 mm
We offer the cut products to our customers without deburring, degreasing or other processing.
Cutting with cut-off saw
Steel grades:
- stainless steel,
- heat-resistant steel,
- steel,
- aluminium.
Maximum diameter: 50 mm
It takes less time to cut with a cut-off saw, but the cut length is more inaccurate, the cut surface may burn and be heavily burr. Quick cutting is recommended when rough cutting is required and it is not a problem if the burr on the pieces packed together scratches the product.
Size tolerance typically: +/- 15 mm
We offer the cut products to our customers without deburring, degreasing or other processing.
